There are two types of work at height. In the first, a man goes up with a tool — replace the bulb, check the sensor, tighten the bracket. In the second one, two people go upstairs with the material, and they stay there for two hours because it is being installed, not repaired.
The MX600SN is a machine for a different kind of job. The same working height as the narrower platform from our offer — 7.8 meters — but with twice the floor i with a load capacity of 500 kilograms.
Content
- 500 kg: what it really means
- Platform 2.3 x 1.15 m
- Working height and platform height
- Dimensions and where the machine can fit
- Self-propelled, battery-powered
- Who is it intended for?
- Table of specifications
- How to get an offer
500 kg: what it really means
The carrying capacity of the platform is not the number of people but the total mass of everything on top. The actual calculation looks like this:
| Item | Mass |
|---|---|
| Equipment worker | ~100–120 kg |
| Another worker with equipment | ~100–120 kg |
| Tool box and small accessories | ~30–50 kg |
| Material to be mounted | the rest |
With 500 kilograms, two workers with tools consume approximately half of the capacity — there is a real two hundred and more kilograms left for material. It is the difference between a machine that is climbed and a machine that is worked on.
In comparison, the 230kg rig is a one-man machine and nothing more. If the work is done in pairs, a load capacity of 500 kg is not a luxury but a requirement — exceeding the load capacity at a height of six meters is not a malfunction but a tipping over.
Platform 2.3 x 1.15 m
It’s under the platform 2.3 by 1.15 meters — a little more than two and a half square meters. Practically, it is a space where two people work side by side without bumping into each other, with the toolbox and material on the floor, not in their hands.
The long side of 2.3 meters is important when working on something that is long in itself — string lights, cable runs, ventilation ducts, pipes. Instead of moving the machine every half meter, the entire segment is covered from one position.
Working height and platform height
The platform rises to 5.8 meters, and the working height is 7.8 meters — the difference is about two meters, which is counted as a man’s reach with his hands above his head.
This covers the vast majority of halls, warehouses, shops and production facilities in our country. If you work at ten meters and more, you need it MX1000S. How the required height is calculated, we explained in a guide through choosing a platform.
Dimensions and where the machine can fit
The overall dimensions of the machine are 2,475 × 1,18 × 1,73 m, and its own mass 2,300 kg.
Two numbers are worth noting. It’s the first width of 1.18 m — the machine does not go through a standard internal door, but instead looks for a wide entrance, industrial or garage door. If the space to enter is narrow, a narrower platform is the only choice, no matter how attractive the load capacity may be.
It’s the second one height of 1.73 m in transport position, which is lower than most standard industrial openings — the machine passes under the lintel without unfolding.
If working on a floor or gallery, the mass of 2,300 kg should be compared with the permissible floor load. It’s a five-minute check that prevents an expensive problem.
Self-propelled, battery-powered
MX600SN is self-propelled platform with automatic movement function and does not require an external power source. No cable, no generator, no exhaust gases.
For work that moves along the hall, self-driving is the biggest time saver — the machine is moved without getting down and without another person pushing. The battery drive is a requirement for working indoors: without exhaust gases and with low noise, it works while the production or shop functions normally.
Who is it intended for?
The MX600SN makes sense when:
- two workers go up, or one with a larger amount of material
- it works up to seven and a half meters high
- the job is assembly, not just intervention — installations, lighting, ventilation, cable routes
- it is done in a closed space with a wide entrance
- the work moves along the hall and requires frequent movement of the machine
Typical users are electrical and mechanical installation contractors, lighting and ventilation installation companies, maintenance services in large halls and sports facilities, as well as companies that equip retail stores.
Table of specifications
| Item | Value |
|---|---|
| Working height | 7,8 m |
| Platform height | 5,8 m |
| Carrying capacity | 500 kg |
| Dimensions of the platform | 2,3 × 1,15 m |
| Machine dimensions | 2,475 × 1,18 × 1,73 m |
| Own mass | 2,300 kg |
| Drive | self-propelled, battery-powered, without external power supply |
| Guarantee for legal entities | 12 months* |
How to get an offer
For a quote, send us three pieces of information: the height to be worked on, the total mass of people and materials going up, and the narrowest opening the machine must pass through. With those numbers, you can immediately see if the MX600SN is the right choice or the right fit for you narrower MX580S.
Use it inquiry form or call 021/6040-505. You have the whole category on the page platforms for working at height.
Scissor lift MX600SN
Photos, technical data and performances are on the model page. For an offer, call us or send an inquiry.
Payment for registered business entities in the Republic of Serbia is made in dinar equivalent at the middle exchange rate of the NBS on the day of payment. The guarantee for legal entities is 12 months*.
Reminder: the lifting work platform is work equipment and is subject to periodic review, and the handler training for safe work.
* The guarantee is contracted in accordance with the valid laws of the Republic of Serbia.
