Most scissor lifts solve the height problem and create the width problem. The one-and-a-half meter machine doesn’t go through the door of the store, it doesn’t go between the racks and it doesn’t fit in the elevator — so the work ends up being done from a ladder again.
MX580S is designed so that problem does not exist. Working height of 7.8 meters, and the width of everything 76 centimeters — narrow enough for a standard door.
Content
- Why 76 centimeters is the key figure
- Working height and platform height
- A load capacity of 230 kg — for whom is that enough?
- Self-propelled and battery powered
- Who is it intended for?
- Table of specifications
- Price
Why 76 centimeters is the key figure
Standard interior doors in Serbia are usually 80 or 90 centimeters wide. The machine is wide 0,76 m it goes through both, and that’s the difference between a platform that you can bring into the work space and a platform that stays in front of the building.
The same logic applies to a passage between racks, a corridor in a shopping center, an entrance to a boiler room or a room with installations. If the work is done indoors and space is tight, width is more important than anything else on the spec sheet.
The overall dimensions of the machine are 1,68 × 0,76 × 1,84 m. The height of 1.84 m means it goes under most lintels and through garage doors without folding the fence.
Working height and platform height
The platform rises to 5.8 meters, and the working height is 7.8 meters — the difference is about two meters, which is calculated for a person to reach with his hands above him.
Practical: the MX580S works comfortably at heights of up to seven and a half meters. This covers lighting and installations in most halls and shops, ventilation, cameras, suspended ceilings, painting and cleaning of high surfaces.
If you work at ten meters and more, this is not your machine — take a look MX1000S. How exactly the required height is calculated, we explained in a guide through choosing a platform.
A load capacity of 230 kg — for whom is that enough?
The platform carries 230 kilograms. It is, realistically, one man with a tool and a small amount of material.
For lighting service, replacement of light bulbs and starters, installation of cameras, maintenance of installations and similar tasks — quite enough. For a job in which there are two people up there, or the material is brought out in large quantities, the load capacity is too small and you are looking for it MX600SN with 500 kg.
The dimensions of the platform are 1,67 × 0,74 m — enough to stand comfortably, with the tool at your feet. It’s not room for two and boxes, and the machine doesn’t pretend to be.
Self-propelled and battery powered
MX580S is self-propelled platform with automatic movement function, battery powered. It does not require an external power source, extension cable or generator.
It’s more than comfort. A self-moving machine means the operator doesn’t have to get off to move it a few meters away — and that’s the biggest waste of time when working at height. With a long line of lights in the hall, the difference between a machine that drives itself and one that is pushed is half a day’s work.
Battery operation is a requirement for indoor operation. There are no exhaust gases, the noise is minimal, so you can work in a store, production or food processing plant without interrupting the work around you.
It’s own mass 1,500 kg. If you are working on a floor or in a gallery, that information should be compared with the permissible load on the floor.
Who is it intended for?
The MX580S makes sense when:
- it works up to seven and a half meters high
- a man goes up with a tool
- the space is cramped — doors, corridors, passages between racks
- it is done indoors, where exhaust gases and noise are not acceptable
- the work moves along the room and does not stand in one place
Typical users are maintenance services in halls and shopping centers, electrical installers, lighting and air conditioning service companies, hotels, sports halls and production plants that maintain their own installations.
Table of specifications
| Item | Value |
|---|---|
| Working height | 7,8 m |
| Platform height | 5,8 m |
| Carrying capacity | 230 kg |
| Dimensions of the platform | 1,67 × 0,74 m |
| Machine dimensions | 1,68 × 0,76 × 1,84 m |
| Own mass | 1,500 kg |
| Drive | self-propelled, battery-powered, without external power supply |
| Guarantee for legal entities | 12 months* |
Price
€10,900 + VAT.
MX580S scissor lift
Photos, technical data and performances are on the model page. For an offer, call us or send an inquiry.
Payment for registered business entities in the Republic of Serbia is made in dinar equivalent at the middle exchange rate of the NBS on the day of payment. The guarantee for legal entities is 12 months*.
Before ordering, it is worth checking two things: the narrowest opening through which the machine must pass and the permissible floor load if working above the ground floor. If you are not sure, we will measure with you.
Use for an offer inquiry form or call 021/6040-505. You have the whole category on the page platforms for working at height.
Reminder: the lifting work platform is work equipment, so it is subject to periodic inspection and training of the operator – about it in the texts on periodic review i about training.
* The guarantee is contracted in accordance with the valid laws of the Republic of Serbia.
